lock AUDI A4 1995 B5 / 1.G AFC Engine Exhaust System Components Workshop Manual

26-1


Exhaust system components,
removing and installing

Note:

As a general rule, always install new seals and
gaskets and clamping sleeves.
Always replace self-locking nuts.
Install retaining rings and bolted connections as
specified Parts catalog microfiche.

Make sure that there is adequate clearance
between the body and the exhaust system
components.
Instructions for aligning the exhaust system free
of stress will be issued in a subsequent
Technical Bulletin.
Pa
ge 1 of 6 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.26.1

26-2


Front-wheel-drive, engine code AFC

1 -
Locking nut
25 Nm (18 ft lb)
2 -
Three Way Catalytic Converter (TWC)
3 -
Gasket
4 -
Retaining ring When replacing always use a lubricant and
avoid damaging the rubber.
5 -
Rear muffler
6 -
Hex bolt 25 Nm (18 ft lb)
Pa
ge 2 of 6 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.26.1