ECU AUDI A4 1995 B5 / 1.G AFC Engine Fuel Supply System Components Workshop Manual

20-1


Fuel supply system
components, removing and
installing

WARNING!

Always be sure to comply with applicable
safety precautions when working on the fuel
system page 20
-3 .
Pay attention to rules of cleanliness page 20
-
2 .
Adjusting accelerator pedal cable page 20
-
15
.

Notes:

Hose connections are secured with clamp-type,
screw-type, spring-type clamps.
Always replace clamp-type with spring-type or
screw-type clamps.
Pa
ge 1 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1

20-8

Front-wheel-drive vehicles

- Turn hose -7- and wiring harness -5- into position as shown at upper
left of illustration; when installing flange, turn in direction of arrow as
shown at upper right of illustration.
- Compress clamp -3- with pliers, VAG 1275.
1 - Reservoir housing
2 - Flange
3 - Clamp
4 - Securing bolt
5 - Wiring
6 - Cable strap
7 - Hose
- Install reservoir housing with flange into fuel tank.
Wiring for fuel level sensor must be routed between return line and
fuel tank housing.

- Turn flange to left until arrows (FRONT) are aligned.
Pa
ge 13 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1

20-9

All wheel-drive-vehicles

- Turn hose -7- and wiring harness -5- into position as shown in upper
left of illustration; when installing flange, turn in direction of arrow as
shown at upper right of illustration.
- Compress clamp -3- with pliers VAG 1275.
1 - Reservoir housing
2 - Flange
3 - Clamp
4 - Securing bolt
5 - Wiring
6 - Cable strap
7 - Hose
- Install reservoir housing with flange into fuel tank.
Wiring for fuel level sensor must be routed between fuel transfer
pump line and fuel tank housing.

- Turn flange to left until arrows (QUATTRO) are aligned.
Pa
ge 14 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1

20-13


Accelerator pedal cable and linkage,
servicing

1 -
Cable attachment
2 -
10 Nm (7ft lb)
3 -
Cable installation direction
Arrow
4 -
Cam Adjusting page 20
-15
5 -
Cable securing clip
Pa
ge 20 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1

20-16

- Insert securing clip for cable sleeve.

- Release accelerator pedal.

Note:
After adjusting the cable, check idle speed and
check the wide open throttle stop at the throttle
valve.
Pa
ge 24 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1