wiring diagram AUDI A4 1995 B5 / 1.G AFC Engine Throttle position Sensor Checking And Adjusting Workshop Manual

24-79

- Check B+ wire for continuity between TP sensor
connector terminal 1 and test box socket A3.


Specified value: max. 1 ohm ( )
- Check signal wire for continuity between TP
sensor connector terminal 3 and test box socket
A24.


Specified value: max. 1 ohm ( ) If the specified value is not obtained:

- Determine open or short circuit in wiring using
wiring diagram; repair as necessary.

6-pin TP sensor
connector terminal ECM connector A
terminal or Ground
1 A3
3 A24
2 Intake manifold Ground
(GND)

Note:
If it becomes necessary to repair or replace any of the throttle position
sensor electrical terminals, ONLY replace with gold-plated terminals.
Pa
ge 3 of 5 Throttle Position
(TP
) sensor, checkin
g and ad
justin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.22