sensor AUDI A4 1995 B5 / 1.G APB Engine Secondary Air System Workshop Manual
Page 8 of 29
26-38
- Disconnect both connectors -2- from control modules for exhaust gas
temperature.
- Remove control modules from intake manifold and set wires aside.
- Secondary Air Injection (AIR) solenoid valve -N112- is secured to a
bracket below control modules for exhaust gas temperature sensor.
- Disconnect harness connector from valve and slide bracket off studs at
intake manifold with vacuum lines connected.
- Disconnect vacuum lines from Secondary Air Injection (AIR) solenoid
valve, remove valve from bracket.
Pa
ge 8 of 29 Secondar
y air s
ystem
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.26.2