sensor AUDI A4 1995 B5 / 1.G ATW Engine Electronic Power Control Checking Owner's Manual
Page 35 of 51
24-141
 
  
Display fields  
  
1   2   3   4  
Display group 063: Kick down function, adapting  
Display   xx %   xx %  
Kick 
down  ---  
Indicated   Sensor 1 for  
Pedal 
position  Sensor 2 for  
Pedal 
position  Kick 
down  Adaptation condition  
Functional 
range       
Kick 
down  operate  
ADP in progress  
ADP OK  
ERROR  
Specified value   12 to 97 %   4 to 49 %  
Kick 
down  ADP OK  
Note  
  
  
  
If "ERROR." is displayed: Check DTC memory   Page 
01
-16
 .  
Note:  
 
The abbreviation "ADP" in display field 4 stands for Adaptation.
 "ERROR" can be indicated, for example, if the accelerator pedal is not immediately pressed in response to a request by 
the tester or if the accelerator pedal is released while adaptation is running despite the fact that adaptation is not yet 
Pa
ge 35 of 51 Electronic En
gine Power Control 
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4 
Page 39 of 51
24-144
      
Note:  
     For safety reasons, the instruction from the 
accelerator pedal sensor (potentiometer) to the 
ECM to open the throttle valve is suppressed 
when brake is being operated. This requires the 
brake light switch signal and also the brake pedal 
switch signal in the control module. If brake pedal 
is operated with accelerator pedal constantly 
depressed, engine is immediately regulated 
down to idle speed. A faulty switch can lead to 
undesired regulation. 
     
Test sequence  
     
-  Connect VAS5051 tester or VAG1551 scan tool 
and select control module for engine electronics 
using "address word" 01   Page 01
-10
. Ignition 
must remain switched on. 
Rapid data transfer 
HELP
Select function XX
    
When indicated on display  
-  Press buttons -0- and -8- to select "Read Measuring Value Block" and 
press -Q- button to confirm input. 
Read measurin
g value block 
Q
Enter displa
y group number XXX
    
When indicated on display  
-  Press buttons -0-, -6- and -6- to select "display group number 066" and 
press -Q- button to confirm input. 
Pa
ge 39 of 51 Electronic En
gine Power Control 
(EPC
) (E-Gas
), checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.4