sensor AUDI A4 1995 B5 / 1.G AWM Engine Charge Pressure System With Exhaust Turbocharger Workshop Manual
Page 11 of 22
21-54
- Remove bolts -arrows-.
- Remove air duct -1- and -2-.
- Disconnect wiring connectors as follows:
1 - on ACF valve (in addition, remove ACF valve from air filter housing)
2 - on mass air flow sensor
3 - on Wastegate Bypass Regulator valve -N75-
- Move wiring aside and remove air filter housing -arrows-.
Pa
ge 11 of 22 Char
ge pressure s
ystem with exhaust turbochar
ger, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.3
Page 20 of 22
21-61
4 -
Air duct hose
Between intake manifold and charge air
cooler (intercooler)
5 -
O-ring Replace, if damaged
6 -
Charge Air Pressure sensor -G31-
7 -
3 Nm
8 -
Rubber grommet
9 -
Bracket Riveted to body
10 -
Rubber grommet
11 -
Charge air cooler Removing and installing Page 21
-62
Pa
ge 20 of 22 Char
ge pressure s
ystem with exhaust turbochar
ger, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.3
Page 21 of 22
21-62
Charge air cooler (intercooler),
removing and installing
Removing
Lock carrier must be in service position
Page 13
-1 .
- Remove air duct hose -1-.
- Disconnect connector -2- at Charge Air Pressure sensor -G31-.
- Remove air cowl in front of charge air cooler -arrows-.
Pa
ge 21 of 22 Char
ge pressure s
ystem with exhaust turbochar
ger, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.3