service AUDI A4 1995 B5 / 1.G AWM Engine Cylinder Head Remove And Install Workshop Manual
Page 2 of 42
Cylinder heads which have cracks between the
valve seats or between valve seat inserts and
the spark plug thread can be used further
without reducing service life, provided the
cracks do not exceed a maximum of 0.3 mm in
width, or when no more than the first 4 turns of
the spark plug threads are cracked.
Pa
ge 2 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1
Page 24 of 42
15-21
Procedure
Engine in vehicle
Lock carrier must be in service position
Page 13
-1 .
Note:
All cable ties which are released or cut open
when removing must be located in the same
position when installing.
- Observe or obtain radio anti-theft code on
vehicles with coded radio.
- Disconnect Ground strap at battery with ignition
switched off.
- Drain coolant Page 19
-4 .
- Remove intake line Page 15
-9 .
- Remove ribbed belt and tensioner for ribbed belt
Page 13
-18
.
- Remove air filter cover -arrow-.
Pa
ge 24 of 42 C
ylinder head, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.1