warning light AUDI A4 1995 B5 / 1.G AWM Engine On Board Diagnostic Workshop Manual
Page 2 of 13
01-2
      
If the ECM recognizes malfunctions that lead to 
a worsening of emissions values, it indicates 
them by lighting the Malfunction Indicator Lamp 
(MIL) -K83- in the instrument cluster. Meaning 
of exhaust MIL   Page 01
-3 . 
     
"E-Gas"-relevant malfunctions are also 
indicated by the warning lamp for Electronic 
Power Control ("EPC warning lamp") in the 
instrument cluster. 
Pa
ge 2 of 13
11/22/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triFMELH.htm 
Page 5 of 13
01-5
      
Malfunction Indicator Lamp (MIL), 
checking
 
     
Function test of warning lamp  
     
-  Switch ignition on.
     
 
Exhaust MIL must light up
     
- Start engine. 
     
 Shortly after engine is started, the 
Malfunction Indicator Lamp (MIL) will go out 
if there are no malfunctions stored in DTC 
memory that relate to the E-gas system 
     
Note:  
     The switch-on signal for Malfunction Indicator 
Lamp (MIL) is transfered from the Engine Control 
Module (ECM) to the instrument cluster via CAN-
bus. Check data exchange between Engine 
Control Module (ECM) and other CAN capable 
control modules   Page 24
-178
  
Pa
ge 5 of 13
11/22/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triFMELH.htm