ESP AUDI A4 1995 B5 / 1.G Brakes Basic Setting 04 User Guide
Page 52 of 64
01-288
Output Diagnostic Test Mode (DTM)
-
Ifl: B+
Ofl: 0V
fl wheel locked
Indicated on display:
- Keep pressing brake pedal.
Inlet valve is activated. It interrupts the brake line. However, fluid pressure
is still maintained in the wheel cylinder. The left-front wheel remains
locked.
Note:
This test step in the output diagnostic test mode corresponds to the
"maintain pressure" phase during ABS-controlled braking.
-
Press button.
Pa
ge 52 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15
Page 54 of 64
01-290
If you cannot turn the wheel, check whether the
brake line for the left-front wheels is connected
correctly.
If yes, this indicates a mechanical malfunction in one of the valves,
providing there is no electrical malfunction in the system. Replace
hydraulic control unit.
If the pedal gives under your foot, this means that the inlet valve or the
check valve activated in parallel to the inlet valve is leaking. Replace
hydraulic unit.
Note:
This test step in the output diagnostic test mode corresponds to the
"pressure reduction" phase during ABS-controlled braking.
-
Press button.
Pa
ge 54 of 64 Basic settin
g (scan tool function 04
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.15