AUDI A4 1995 B5 / 1.G Brakes Code Control Module Workshop Manual

01-56


Code Control Module
(function 07)
Has an ASR control module just been replaced
or is the following DTC stored in DTC memory of
the control module?

"ABS/EDL transmission electrical connection"
If so, control module must be coded according to
engine and transmission type.

Note:
Coding is only possible if a workshop number is
stored in the VAG1551 Scan Tool (ST).

Operating instructions for VAG1551

The ABS/EDL/ASR control module with index
"N" was implemented in 05.95 along with
implementation of the automatic transmission
01V for vehicles equipped with ASR. The
coding versions of this control module were
expanded to include automatic transmission
01V.
Control modules with index "N" can replace
previous control modules with index "M" as
Pa
ge 1 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7

necessary.
For vehicles prior to 05.95, control modules with
index "M" will no longer be available after
current supplies are exhausted.
Pa
ge 2 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7

01-57

- Connect the VAG1551 Scan Tool (ST) and
select "Brake Electronics" via address word 03
page 01
-4 .

- Check the control module version page 01
-52

and press the button.

Notes:

During control module identification, a 3 or 5-
digit code must always be indicated.
If control module does not indicate coding
corresponding to vehicle, or if control module
has been replaced, code it as follows.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -7- to select "Code control module" function 03.
Rapid data transfer
Q
07 - Code control module

Indicated on display:
- Press -Q- button to confirm input.
Code control module
Q
Enter code number
XXXXX

Indicated on display:
- Enter the appropriate code number and press -Q- button to confirm
input.
Pa
ge 3 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7

01-58
Coding table Engine



Transmission

Data
transmission
via: Control module
part number
with index
Code
number Note:
2.6
Liter 6
Cyl. 2V Manual
transmission 012 single wires 4D0 907
379 M;
N 00000 Terminal 45 at ABS
control module (w/EDL) -
J104- not occupied.

Automatic
transmission 01V single wires 4D0 907
379 N 00003 Terminal 45 at ABS
control module (w/EDL) -
J104- occupied with 12V.
2.8
Liter 6
Cyl. 2V Manual
transmission 012 single wires 4D0 907
379 M;
N 00000 Terminal 45 at ABS
control module (w/EDL) -
J104- not occupied.

Automatic
transmission 01V single wires 4D0 907
379 N 00003 Terminal 45 at ABS
control module (w/EDL) -
J104- occupied with 12V.
Pa
ge 4 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7

01-59

Engine



Transmission

Data
transmission
via: Control module
part number
with index
Code
number Note:
2.8
Liter 6
Cyl. 5V Manual
transmission 012 single wires 4D0 907
379 N 00000 Terminal 45 at ABS
control module (w/EDL) -
J104- not occupied.

Automatic
transmission 01V single wires 4D0 907
379 N 00003 Terminal 45 at ABS
control module (w/EDL) -
J104- occupied with 12V.
Pa
ge 5 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7

01-60

4D0 907 379 X S
yst. ident.
Software ver.
Coding 00000
WSCXXXXX

Display will indicate the control module identification and the coding
entered (e.g. 00000).
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -6- to select "End Output" function 06. Press -Q-
button to confirm input.
Pa
ge 6 of 6 Code Control Module
(function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.7