buttons AUDI A4 1995 B5 / 1.G Brakes Erase DTC Memory End Output Workshop Manual

01-11


Erase DTC Memory (function
05), End Output (function 06)

Requirements

DTC memory was checked

1. Erase DTC Memory (function 05)

-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:(Function selection screen)
- Press buttons -0- and -5- to select "Erase DTC Memory", function 05.
Rapid data transfer
Q
05 - Erase DTC Memor
y

Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer DTC Memory is erased!

Indicated on display:
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:(Function selection screen)
Pa
ge 1 of 15 Erase DTC Memor
y (function 05
), End Out
put
(function 06
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.2

01-12

Notes: Attention!DTC memory is not interrogated

2. End Output (function 06)
If this is displayed, the check sequence has not been been carried out.Follow test sequence exactly: First check DTC memory, then erase it.
- Press buttons -0- and -6- to end output.
Rapid data transfer
Q
06 - End Output

Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
Help
Insert address word XX

Indicated on display:
ABS warning light -K47- must go out after approx. 2 seconds. - Switch off ignition.
- Disconnect harness connector for the VAG1551 scan tool
- Switch on ignition
Pa
ge 2 of 15 Erase DTC Memor
y (function 05
), End Out
put
(function 06
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.2

01-15

Erase DTC Memory (function 05)

Requirements

DTC memory was checked

-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.
Rapid data transfer
Q
05 - Erase DTC Memor
y

Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer DTC Memor
y is erased!

Indicated on display:
-
Press button.
Rapid data transfer
HELP
Select function XX

Indicated on display:
Notes:
Attention!DTC memor
y is not interro
gated

If this is displayed, the check sequence has not been been carried out.Observe test sequence exactly. Check DTC memory first and erase it
within the same diagnostic cycle.
Pa
ge 5 of 15 Erase DTC Memor
y (function 05
), End Out
put
(function 06
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.2

01-16

End Output (function 06) Rapid data transfer
HELP
Select function XX

Indicated on display:
- Press buttons -0- and -6- to select "End Output" function 06.
Rapid data transfer
Q
06 - End Output

Indicated on display:
- Press -Q- button to confirm input.
Rapid data transfer
HELP
Enter address word XX

Indicated on display:
- Switch ignition off.
- Disconnect scan tool.
Pa
ge 6 of 15 Erase DTC Memor
y (function 05
), End Out
put
(function 06
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.2