airbag AUDI A4 1995 B5 / 1.G Multi Functions Steering Wheel Workshop Manual
Page 6 of 8
91-73
Operating switch on multi-function
steering wheel, removing and installing
Removing
- Disconnect battery ground (GND) strap.
Note:
Always observe airbag safety precautions when
working on airbag system components
Repair Manual, Body Interior, Repair Group
69; airbag safety precautions
- Release steering column adjustment. Pull
steering wheel as far out and up as possible.
- Remove airbag unit by removing screws at left and right of steering
wheel using a T30 TORX bit. Tightening torque: 6 Nm
Pa
ge 6 of 8 Multi-function steerin
g wheel
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.91.4
Page 7 of 8
91-74
- Carefully flip airbag unit forward.
Installing
Note:
During installation, make sure that the wires of connector -3- are in the
guides and are not pinched. - Disconnect harness connectors -1- and -2- at airbag unit.
- Remove airbag unit.
- Disconnect harness connector -3- and remove both T10 TORX screws
at left or right of operating switch.
- Remove operating switch toward front.
- Install in reverse order of removal.
Pa
ge 7 of 8 Multi-function steerin
g wheel
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.91.4