tow AUDI A4 1996 B5 / 1.G 01A Transmission Input Shaft Assembly Workshop Manual
Page 12 of 17
35-11
Fig. 11 Pressing off synchronizer hub for 3rd and 4th gears
- Remove circlip before pressing off.
- Press 3rd gear synchronizer ring (arrow) toward 3rd gear and install
separating device -A-.
A- Separating device 22-115 mm (0.866-4.527 in.), e.g. Kukko 17/2
separating tool
The bent end of the spring (arrow) must be hooked into the hole of the
gear. Fig. 12 Inserting spring in gear
Pa
ge 12 of 1711/19/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triJBHHO.htm