light AUDI A4 1996 B5 / 1.G AFC Engine Closed Throttle Position Switch Checking And Adjusting Workshop Manual

24-74

Electrical check

- Remove intake air sound absorber.

- Disconnect harness connector at throttle
body.

If the specified value is not obtained by opening the throttle slightly, or if
the specified value is obtained only by moving the throttle:
If, after adjusting the CTP switch, it is still not possible to obtain the
specified function: -
Switch multimeter (Fluke 83 or equivalent) to measure resistance ( )
and connect between terminals 4 and 6 using jumper wires from
connector test kit VW 1594. Specified value: 0 ohms (continuity)
- Open throttle slightly.

Specified value: (no continuity)- Adjust CTP switch page 24
-75
.
- Replace throttle position sensor assembly.
Pa
ge 3 of 5 Closed Throttle Position
(CTP
) switch, checkin
g and ad
justin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.21