tire type AUDI A4 1996 B5 / 1.G AFC Engine Cylinder Block Crankshaft And Flywheel Component Assembly Manual

13-22

Checking radial clearance

Note:
Radial clearance is measured using Plastigage
.
Plastigage type
Color
Measuring range
PG-1 Green 0.025 - 0.076 mm
PR-1 Red 0.050 - 0.150 mm

- Remove crankshaft bearing cap.

- Clean bearing shell and crankshaft journal.

CAUTION!
Do NOT turn the crankshaft or allow it to rotate during the
measurement with Plastigage in place. -
Place Plastigage on crankshaft journal over entire width of bearing,
or in bearing shell (arrow). - Install crankshaft bearing cap with bearing shell and new bolts.
-
Tighten to 60 Nm (44 ft lb) plus1/2-turn 180 .
Pa
ge 22 of 32 C
ylinder block, crankshaft and fl
ywheel, com
ponent la
yout
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.13.4