warning AUDI A4 1996 B5 / 1.G AHA ATQ Engines Cylinder Block Crankshaft And Flywheel Component Service Manual
Page 12 of 33
13-13
- Turn crankshaft at central bolt of toothed belt gear in direction of
engine rotation to cyl. 1 TDC. Timing marks -A- and -B- must be
aligned.
WARNING!
DO NOT turn crankshaft while checking for TDC mark. Personal
injury may result. - Check position of camshafts. Large holes (arrow) of securing plates on
camshaft sprockets must face toward inside and align.
If not, turn crankshaft one revolution further.
- Remove sealing plug from left-side of cylinder block.
- Top Dead Center (TDC) mark on crankshaft must be visible or be felt
behind bore of removed sealing plug.
Pa
ge 12 of 33 C
ylinder block, crankshaft and fl
ywheel, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE03.13.2