oil viscosity AUDI A4 1996 B5 / 1.G APB Engine Lubrication System Components Workshop Manual
Page 1 of 74
17-1
Lubrication system
components, removing and
installing
Notes:
If large quantities of metal particles or other
deposits (caused, for example, by partial
seizure of the crankshaft or connecting rod
bearings) are found in the engine oil when
performing repairs, clean the oil passages
thoroughly and replace the oil cooler in order to
prevent further damage from occurring later.
Always replace O-rings, gaskets and oil seals
when performing repairs.
The oil level must not be above the max. mark -
otherwise this can cause damage to the
catalytic converter. Markings Page 17
-67
Viscosity grades and oil specifications
Repair Manual, Maintenance
Oil capacities
Repair Manual, Maintenance
Checking oil pressure Page 17
-65
Pa
ge 1 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1
Page 72 of 74
17-66
Engine oil, specifications
A high-quality multigrade oil is put in at the
factory: this can be used all year round, except in
extremely cold climates.
Viscosity grades and oil specifications
Viscosity grades and oil specifications
Repair Manual, Maintenance
Pa
ge 72 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1