lights AUDI A4 1996 B5 / 1.G APB Engine Motronic Multiport Fuel Injection System Servising Workshop Manual
Page 48 of 90
24-41
      
-  Switch ignition on. The diode test lamp should 
light up. 
     
-  If diode test lamp does not light up, test for open 
circuits in wiring between contact 1 and fuse for 
injectors. If necessary, rectify open circuit. 
     
       Electrical Wiring Diagrams, Troubleshooting & 
Component Locations        
-  If diode test lamp lights up, test activation of 
injectors. 
     
C - Testing activation of injectors  
     
-  Remove plug connector from the injector which 
is to be tested. 
    
Specified value: the diode test lamp should start flashing.  
Note:  
Diode test lamps with a low current draw continue to glow faintly between -  Connect diode test lamp VAG 1527 between the battery positive 
terminal (+) and contact 2 on the connector. 
-  Operate starter for a few seconds (the engine can be allowed to start).
Pa
ge 48 of 90 Motronic Multi
port Fuel In
jection 
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1