AUDI A4 1996 B5 / 1.G APB Engine Motronic Syst
Page 91 of 166
01-74
 
DTC  
Description of malfunction  
Corrective action  
SAE  
VAG  
  
  
P1851   18259   Data Bus Powertrain  
Missing Message from Brake Contr  
 Repair Manual, Brake System On Board Diagnostic (OBD), Repair 
Group 01, checking DTC memory of ABS control module
    - Check DTC memory of ABS control module
- Check data exchange between Engine-/ABS-
/Transmission control 
module  Page 24
-201
 
P1853   18261   Data Bus Powertrain  
Unplausible Message from Brake 
Contr.    
P1854   18262   Data Bus Powertrain  
Hardware Defective    
P3262   19718   Exhaust bank 1/2 oxygen sensors 
behind catalytic converter  
mixed up  - Check harness connectors for oxygen sensors and check installed 
position of oxygen sensors behind catalytic converter. 1) With this malfunction the EPC (Electronic Power Control) Malfunction Indicator Light (MIL) in the instrument cluster is 
switched on by the ECM. Significance of EPC malfunction indicator light   Page 24
-142
 .  
2) With this malfunction the exhaust Malfunction Indicator Light (MIL) is only switched on by the ECM, if the malfunction is 
recognized after the engine has been restarted. Significance of MIL   Page 01
-3 .  
Pa
ge 91 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 92 of 166
01-75
      
Output Diagnostic Test Mode (DTM)
 
     
Notes:  
     
The DTM can only be performed with the 
ignition switched on and the engine not running.
     The DTM is terminated if the engine is started 
or if an engine speed pulse is detected. 
     During the DTM, individual control elements will 
be activated for approx. 1 minute, or until the 
test program is advanced to the next control 
element by pressing the   button. 
     
The control elements can be tested either by 
listening or by touching. 
     If the DTM is to be repeated, the engine must 
be started. The engine control module needs to 
detect an engine speed of more than 300 rpm. 
     The electric fuel pump runs continuously 
throughout the DTM. 
Pa
ge 92 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 93 of 166
01-76
      
The DTM activates the following components 
in the stated sequence: 
     
Activation sequence  
1.   EVAP Canister Purge Regulator Valve -
N80-  
2.   Secondary Air Injection (AIR) Solenoid 
Valve -N112-  
(This display appears only on vehicles with 
automatic transmission)  
3.   Secondary Air Injection (AIR) Pump Relay -
J299-  
(This display appears only on vehicles with 
automatic transmission)  
4.   Wastegate Bypass Regulator Valve -N75  
5.   Camshaft adjustment  
6.   Leak Detection Pump for EVAP system  
7.   Recirculating valve for turbocharger -N249  
8.   Cylinder 1 Fuel Injector -N30  
9.   Cylinder 4 Fuel Injector -N33  
10.   Cylinder 3 Fuel Injector -N32  
11.   Cylinder 6 Fuel Injector -N84  
12.   Cylinder 2 Fuel Injector -N31  
Pa
ge 93 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 94 of 166
13.   Cylinder 5 Fuel Injector -N83  
Pa
ge 94 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 95 of 166
01-77
      
Test requirements  
     
Fuses for engine electronics OK 
     Fuel pump relay OK 
     
-  Connect vehicle diagnostic, testing and 
information system VAS 5051 or VAG1551 scan 
tool and select engine electronics control 
module by entering address word "01"   Page 01
-9 . When doing this the ignition must be 
switched on. 
Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -0- and -3- to select function "Output Diagnostic Test 
Mode." 
Rapid data transfer 
Q
03 - Output Dia
gnostic Test Mode
    
Indicated on display  
Pa
ge 95 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 96 of 166
01-78
      
Actuating EVAP Canister Purge Regulator 
Valve -N80  
     
-  Confirm input with -Q- button.Output Diagnostic Test Mode EVAP canister pur
ge re
gulator valve -N80
    
Indicated on display  
This solenoid valve will continue to be actuated (i.e. will click) until the   
button is pressed to advance program to next control element.  
If the solenoid valve is not actuated (does not click):  -  Check EVAP Canister Purge Regulator Valve -N80   Page 24
-134
 .
Pa
ge 96 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 97 of 166
01-79
      
Actuating Secondary Air Injection (AIR) 
Solenoid Valve -N112  
     
Note:  
     Only vehicles with automatic transmission are 
equipped with a secondary air injection system. 
Vehicles with manual transmission do not have a 
secondary air injection system. For this reason 
are on vehicles with manual transmission the 
following components Secondary Air Injection 
(AIR) Solenoid Valve -N112 and Secondary Air 
Injection (AIR) Pump Relay -J299 not displayed. 
     
- 
Press button.Output Diagnostic Test Mode Secondar
y Air 
(AIR
) Injection valve -N112
    
Indicated on display  
This solenoid valve will continue to be actuated (i.e. will click) until the   
button is pressed to advance the program to the next control element.  
If the secondary air injection valve does not click:  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB, Repair Group 26, Checking secondary air injection valve
   
-  Check Secondary Air Injection (AIR) Solenoid Valve -N112
Pa
ge 97 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 98 of 166
01-80
      
Actuating Secondary Air Injection (AIR) Pump 
Relay -J299  
     
Note:  
     Only vehicles with automatic transmission are 
equipped with a secondary air injection system. 
Vehicles with manual transmission do not have a 
secondary air injection system. For this reason is 
on vehicles with manual transmission the 
following component Secondary Air Injection 
(AIR) Pump Relay -J299 not displayed. 
     
- 
Press button.Output Diagnostic Test Mode Secondar
y air pump rela
y -J299
    
Indicated on display  
If the Secondary Air Injection (AIR) Pump Motor -V101- does not run at 
intervals:  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB, Repair Group 26, Checking Secondary Air Injection (AIR) Pump Relay 
-J299
       The Secondary Air Injection (AIR) Pump Relay -J299- activates the 
Secondary Air Injection (AIR) Pump Motor -V101-, which runs for 
approx: 1 minute at intervals. 
-  Check Secondary Air Injection (AIR) Pump Relay -J299.
Pa
ge 98 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 99 of 166
01-81
      
Activating Wastegate Bypass Regulator Valve 
-N75-  
     
- 
Press button.Output Diagnostic Test Mode Wastegate bypass regulator valve -N75
    
Indicated on display  
This solenoid valve is activated for 1 minute (clicks), unless   button is 
pressed first to switch to the next actuator.  
If valve is not activated (does not click):  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB, Repair Group 21, Turbocharger, Checking Wastgate Bypass Regulator Valve 
-N75
   
Actuating camshaft adjustment valves -N205-, -N208-  
- 
Press button.
Output Diagnostic Test Mode Camshaft Ad
justment
    
Indicated on display  
If camshaft adjustment valve 1 or 2 is not activated:  
 Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine Code(s): APB, Repair Group 15, Camshaft adjustment, checking camshaft adjustment valves
    -  Camshaft adjustment valves 1 and 2 (-N205 and -N208) will continue 
to be activated (or will click) for about 1 minute. 
Pa
ge 99 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1 
Page 100 of 166
01-82
      
Actuating Leak Detection Pump (LDP) -V144-  
     
- 
Press button.Output Diagnostic Test Mode EVAP s
ystem leak detection pump
    
Indicated on display  
The change over valve in the LDP is activated for approximately 1 minute 
(clicks), unless the   button pressed to switch to the next actuator.  
Note:  
The clicking can be heard by listening in the area of the left rear wheel 
housing. 
If valve is not actuated (does not click):  
 Repair Manual, Fuel Supply System, Repair Group 20, Components of EVAP system servicing, Checking Leak Detection Pump (LDP) 
-V144
   
Pa
ge 100 of 166 Motronic s
ystem, On Board Dia
gnostic 
(OBD
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.01.1