window AUDI A4 1996 B5 / 1.G AWM Engine Assembly Workshop Manual
Page 33 of 47
13-33
Installing
Installation is carried out in the reverse order of
removal; note the following:
Radio operating instructions - Install bolts -1 to 6- with locking fluid "D 000 600" and tighten bolts
diagonally.
1, 2 - Bolt M10 x 85
3 to 6 - Bolt M10 x 45
- To help install Generator knock back bushing on bottom securing bolt
slightly.
- Remove viscous fan Page 13
-21
.
- Install ribbed belt Page 13
-20
.
- After connecting battery, enter anti-theft code for radio.- Close windows fully using window switches.
Pa
ge 33 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1
Page 34 of 47
13-34
- Actuate all window switches again for at least
one second in the "close" direction to activate
the automatic open/close function.
- Set clock to correct time.
Tightening torques
Component
Nm
Bracket for Generator, power steering
pump and viscous fan to cylinder block
52
1)
Support for intake manifold
to intake manifold 20
to bracket 20
Power steering pump to bracket 23
Pulley to coolant pump 23
Generator at bracket
M8 23
M10 46
Ribbed belt tensioner to bracket
23
Pa
ge 34 of 47 En
gine, disassemblin
g and assemblin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.1