wheel AUDI A4 1996 B5 / 1.G AWM Engine Motronic Injection System Servicing Workshop Manual

24-4
Technical data

Engine identification

AWM (1.8 L / 5V/ 125 kW-engine)
Idle speed
Engine speed cannot be adjusted, it is regulated by idle
stabilization
Front Wheel Drive
(FWD)
All Wheel Drive (AWD)
740 to 860 RPM
760 to 880 RPM
Engine speed (RPM) limitation
via fuel injector shut-off
about 6800 RPM
Fuel pressure at idle speed Vacuum hose
connected
about 3.5 bar positive pressure

Vacuum hose
disconnected
about 4.0 bar positive pressure
Residual pressure after 10 min. at least 2.5 bar positive pressure
Fuel injectors Injection stream Dual-hole nozzle / same for all
injectors

Injection quantity (30 s)
135 10 ml

Resistance
(room temperature)
12 to 13
Pa
ge 5 of 79 Motronic in
jection s
ystem, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.24.1

24-5


Component locations, overview

Note:
Component location without illustration:
----
- Leak Detection Pump (LDP) -V144-
Below rear left wheelhousing liner
1 -
Evaporative Emission (EVAP) canister
purge regulator valve -N80- Checking Page 24
-114
2 -
Heated Oxygen Sensor (HO2S) -G39-
before catalytic converter, 55 Nm
Constant oxygen sensorCheck Oxygen Sensor (O2S) and oxygen
sensor control before Three Way Catalytic
Converter (TWC) Page 24
-71

Check oxygen sensor aging of oxygen
sensor before catalytic converter Page 24
-84

Check oxygen sensor heater for Oxygen
Sensor (O2S) before Three Way Catalytic
Converter (TWC) Page 24
-89

Removing and installing Page 24
-112
Pa
ge 6 of 79 Motronic in
jection s
ystem, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.24.1