glove box AUDI A4 1996 B5 / 1.G Climate Control Components In Passenger Compartment Workshop Manual

87-127

Control module for fresh air blower -
J126-, removing and installing (1996)

Remove glovebox and glovebox mounting
Repair Manual, Body Interior, Repair Group
70


Note:
Electrical test page 01
-115
. - Unplug electrical connector -A-.
- Remove screw -B- and remove module in direction of arrow.
- Install in reverse order of removal.
Pa
ge 11 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-129

Fresh air blower (V2), removing and
installing (1996)

Remove glovebox, glovebox mounting and
mounting for passenger airbag
Repair Manual, Body Interior, Repair Group
70


Notes: - Remove 4 screws -A- and remove fresh air blower from heater/air
conditioner assembly.
- Install in reverse order of removal.
The fresh air blower must be turned slightly to allow removal from
heater/air conditioner assembly. Testing V2, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 13 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-130

Fresh air blower -V2-, removing and
installing (1997 )

Remove glovebox
Repair Manual, Body Interior, Repair Group
70


Separating fresh air blower -V2- and mounting plate - Remove electrical connector -B-
- Remove bolts -A- and remove fresh air blower with mounting plate from
heater/air conditioner assembly.

- Depress locking tabs -A- and -B- with screwdriver.
- Separate fresh air blower from mounting plate.
- Disconnect electrical harness connectors -C-.
Pa
ge 14 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-134

Footwell air outlets, removing and
installing

Remove glovebox, lower shelf on driver side and
center section of instrument panel complete (trim
and supports)
Repair Manual, Body Interior, Repair Group
70


- Remove connection ducts between footwell and
rear passenger compartment air outlets.
Remove airbag control module -A- Repair
Manual, "Body Interior, Repair Group 69

Remove fixture for instrument panel -B- at center
tunnel Repair Manual, Body Interior, Repair
Group 70

- Remove screws -C-.

- Carefully remove footwell air outlet toward the
passenger compartment.
- Install in reverse order of removal.
Pa
ge 18 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-142

Fresh air/recirculating flap two-way
valve -N63-, removing and installing

Remove glovebox
Repair Manual, Body Interior, Repair Group
70


Notes: - Remove bolt -A-.
- Separate electrical connection.
- Install in reverse order of removal.
Connect vacuum hoses correctly (hose -B- to vacuum reservoir, hose
-C- to vacuum unit). Vacuum hose layout page 87
-184
.
Testing -N63-, output Diagnostic Test Mode (DTM) page 01
-42
.
Electrical test page 01
-115
.
Pa
ge 26 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-147

Air flow flap motor -V71-, removing and
installing (1997 )


Note:
Motor is installed between heater/air conditioning
assembly and bulkhead and operates the air flow
flap and fresh air/recirculating air flap.
Remove glovebox
Repair Manual, Body Interior, Repair Group
70


- Disconnect electrical connector from motor.

- Remove bolts -A- and -B-.
- Unhook strap -C- of bracket from heater/air conditioner assembly
mounting and remove motor.
Pa
ge 31 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21

87-150

Fresh air intake duct temperature
sensor -G89-, removing and installing
(1997 )

Remove glovebox
Repair Manual, Body Interior, Repair Group
70


Notes:
- Carefully spray contact surface of rubber grommet -B- with silicone
spray. - Reach in-between heater/air conditioner assembly and bulkhead and
turn sensor -B- 90 (arrow) (connector -C- remains connected).
Temperature sensor -G89- is easily accessible with air flow flow flap
motor -V71- removed. If sensor can not be turned:

- Remove dust and pollen filter page 87
-158
.
- Reach into intake and turn temperature sensor 90 .
After installing, always check DTC memory page 01
-18
.
Electrical test page 01
-115
.
Pa
ge 34 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21