AUDI A4 1996 B5 / 1.G Front Door Trim User Guide

70-11

Grip handle cover with power window
switch unit and power mirror switch,
removing and installing


- Remove door trim page 70
-3 .

- Remove insulation page 70
-5 .

- Remove vapor barrier page 70
-12
.

- Remove bolts -1- (2x).
Tightening torque: 1.5 Nm (13 in. lb)
- Release retaining tabs -2- (2x) and clips -3- (2x).
- Remove grip handle cover forward.
Pa
ge 11 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-12

Vapor barrier, removing


- Remove door trim page 70
-3 .

- Remove insulation page 70
-5 .

- To install, press in vapor barrier -1- in area of adhesive bead -2-.
- Push power window electrical harness connectors through vapor
barrier.
Pa
ge 12 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-13

Power mirror switch, removing and
installing


- Remove door trim page 70
-3 .

- Remove grip handle cover page 70
-11
.

- Press pins -1- (2x) in direction of arrow.
- Remove retaining tabs -2-.
- Remove power mirror switch -3-.
Pa
ge 13 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-14

Door warning light and footwell lights,
removing and installing


- Detach door warning light -1- from below using screwdriver and
remove toward outside together with cable.
- Disconnect door warning light -1-.
- Detach footwell lighting -2- from front using screwdriver and remove
toward outside together with cable.
- Disconnect footwell lighting -2-.
Pa
ge 14 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-15

Central door locking switch, removing


- Remove door trim page 70
-3 .
- Remove insulation page 70
-5 .
- Using screwdriver, detach retaining tabs (2x) and remove central door
locking switch toward rear.
Pa
ge 15 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-16

Bass speaker, removing


- Remove door trim page 70
-3 .
- Remove insulation page 70
-5 .
- Remove bolts -1- (3x).
Tightening torque: 1.5 Nm (13 in. lb)
- Remove bass speaker -2-.
Pa
ge 16 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-17

Tweeter, removing and installing


- Remove door trim page 70
-3 .

- Remove insulation page 70
-5 .

- Pull wiring from door trim up to bass speaker.

- Remove interior door handle page 70
-19
.

- Using screwdriver, detach bracket -1-.
- Remove tweeter -2-.
Pa
ge 17 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-18

Trim panel in door trim, removing


- Remove door trim page 70
-3 .

- Remove insulation page 70
-5 .

- Pull vapor barrier -3- down in area of trim.
- Carefully open clips -2- of clips -1-.
- Remove trim panel.
Pa
ge 18 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-19

Interior door handle, removing


- Remove door trim page 70
-3 .

- Remove tweeter page 70
-17
.

- Remove central door locking switch (driver-side
only) page 70
-15
.

- Remove bolt -1-.
- Press retaining tabs -2- (2x) and remove interior door handle toward
front.
Pa
ge 19 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1

70-20

Console and trunk release switch,
removing


- Remove door trim page 70
-3 .

- Remove bolts -2- (2x).
- Remove console -5-.
- Disconnect harness connector from switch -1-.
- Remove trim panel -4- together with switch -1-.

- Remove grommet -1-.
Pa
ge 20 of 22 Front door tri
m
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.70.1