ESP AUDI A4 1997 B5 / 1.G 01A Transmission Differential Assembly Workshop Manual

39-132


Note:
From this point on, do not interchange differential bevel gears and their
respective thrust washers. Fig. 12 Adjusting differential bevel gears
- Insert large differential bevel gears with thinnest shims (0.5 mm).
-
Insert small differential bevel gears (turned 180 ) together with thrust
washers. - Drive in differential bevelgear shaft.
- Press small differential bevel gears outward.
- Press large differential bevel gears in direction indicated (arrows), and
check play.
- Determine thickest shims for large differential bevel gears (on each
side) which still just fits.
- Shims for both sides should be of equal thickness.
- Identify shims according to table. Part numbers parts catalog
Pa
ge 13 of 14 Differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.15