diagram AUDI A4 1997 B5 / 1.G 01V Transmission OBD Workshop Manual
Page 1 of 10
01-34
 
     
On Board Diagnostic (OBD), 
initiating 
     
Additional information  
     
Audi A4 Repair Manual, 5 Spd. Automatic 
Transmission 01V, 
     Electrical Wiring Diagrams, Troubleshooting & 
Component Locations 
     Parts catalog 
     
Safety precautions
 
     
If special testing equipment is required 
during test drive, note the following: 
     
WARNING! 
     
Always secure test and measuring 
instruments to the rear seat and have it 
operated by a second person from that 
location. 
     If test and measuring equipment is operated 
from the passenger seat, the passenger-side 
airbag could be activated in case of an 
accident and could lead to injury to the 
person sitting there. 
Pa
ge 1 of 10 On Board Dia
gnostic 
(OBD
), initiatin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.3 
Page 3 of 10
01-36
      
Vehicle Diagnosis, Measuring and 
Information System VAS 5051 or V.A.G 
1551 scan tool, connecting and 
selecting functions
 
     
Test requirements  
     
Selector lever in "P" position and parking 
brake applied. 
     Vehicle voltage supply OK 
     Power supply and fuses for respective 
system OK 
     
       Electrical Wiring Diagrams, Troubleshooting & 
Component Locations   
     
Ground (GND) connections and Ground 
point for transmission OK 
     
       Electrical Wiring Diagrams, Troubleshooting & 
Component Locations   
     
- 
Check Ground connections for corrosion and 
Pa
ge 3 of 10 On Board Dia
gnostic 
(OBD
), initiatin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.3 
Page 9 of 10
01-41
       If again "Control module does not answer!" 
appears:   Control module does not answer! 
HELP
    
Indicated on display:  
Check control module voltage supply.  
 Electrical Wiring Diagrams, Troubleshooting & Component Locations    -  Perform test step 1   page 01
-273
, Electrical check. 
-  Check wiring connections to diagnostic connectors -  Replace control module if necessary
   Location and removing and installing of control module   page 01
-
273
 , item 1 
- 
Press  key.
Rapid data transfer  
HELP
Select function XX
    
Indicated on display:  
-  After the HELP key is pressed, a list of possible functions is printed out.
Pa
ge 9 of 10 On Board Dia
gnostic 
(OBD
), initiatin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.3