ECU AUDI A4 1997 B5 / 1.G 01W Transmission Input Shaft Workshop Manual

35-3


5 -
Needle bearing
Secured with bolt Fig. 1Driving out Fig. 2Allocation of input shaft/needle bearing
Fig. 3

Installed position Fig. 4Pressing in Fig. 5Securing Fig. 6
6 -
Input shaft
With oiling sleeveDriving in oiling sleeve Fig. 7Adjusting Page 35
-17
Allocation of input shaft/needle bearing
Fig. 3

7 -
Needle bearing for for 3rd gear
Identification
8 -
3rd gear
9 -
Spring Inserting in 3rd gear Fig. 13Allocation of spring to gear parts catalog
10 -
Synchronizer ring for 3rd gear
Pa
ge 4 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1

35-6


Fig. 1 Securing bolt for needle bearing
- Remove securing bolt (arrow).

Fig. 2 Driving out needle bearing
Pa
ge 9 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1

35-8


Fig. 5 Pressing in needle bearing
- Install securing bolt and tighten to 25 Nm (18 ft lb).

Tightening torque: 25 Nm (18 ft lb). Fig. 6 Installing securing bolt (arrow)
Pa
ge 11 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1

35-13


Fig. 15 Allocation of circlips
Circlips -1- and -2- secure the input shaft ball bearing.
Determining thickness Page 35
-17
, input shaft, adjusting
Circlip -3- secures the 3rd and 4th gear synchronizer hub.
Thickness: 2.00 mm (0.078 in.).
Identification: brown in color.Circlip -4- secures the 3rd and 4th gear synchronizer hub.
Determining thickness Page 35
-14
, table
Identification: blue in color.
Circlip -5- secures the 5th gear.
Determining thickness Page 35
-14
, table
Pa
ge 16 of 19 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.35.1