boot AUDI A4 1997 B5 / 1.G 01W Transmission Shift Linkage And Servicing Workshop Manual
Page 6 of 17
34-6
40 -
Bolt
40 Nm (30 ft lb)
41 -
Nut 40 Nm (30 ft lb)
42 -
Bolt
43 -
Mounting bracket for pivot rod Revised after 06.96 Fig. 1Mounting bracket shown used 05.96 Pivot rod, fastening 06.96 Fig. 1
44 -
Tensioning ring
45 -
Boot
To remove and install, remove Three Way
Catalytic Converter (TWC) and heat shield Carefully pull over shift rod and pivot rodWhen installing, place on markings of shift
rod and pivot rod
Pa
ge 6 of 17 Shift linka
ge, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.34.1