tow AUDI A4 1997 B5 / 1.G AFC Engine Lock Carrier Removing For Service Workshop Manual
Page 14 of 35
15-17
Installing
- Clean sealing surfaces.
- Install cylinder head gasket.
Lettering on gasket faces toward cylinder
head.
- Install cylinder head.
Pay attention to centering pins in cylinder
block.
- Install cylinder head bolts and tighten by hand.
Tightening
Note: - Tighten cylinder head bolts in two stages:
Stage 1 60 Nm (44 ft lb)
Stage 2 additional 1/2-turn (180 )
For final 1/2-turn, two 1/4-turns (90 ) are also permissible if tightening
with a fixed wrench. It is not necessary to retighten the cylinder head bolts after repairs, or
Pa
ge 14 of 35 Lock carrier, removin
g for service
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.15.4