engine coolant AUDI A4 1997 B5 / 1.G AFC Engine On Board Diagnostic Multiport Fuel Injection Owner's Guide
Page 331 of 366
01-235
 Notes on display field 3 and 4:  
Value "0" = Diagnosis condition not fulfilled. 
Value "1" = Diagnosis condition fulfilled. X  
X  
X  
X  
X  
X  
X  
X  
Meaning of 8-digit "Diagnosis condition 1"  
                       
1 = Coolant temperature: 70 - 110 C (  display group 001)                      
   2 = Engine load: 27 - 66% (  display group 003)                   
      3 = Engine speed: 1800 - 2700 RPM (  display group 003)                
         4 = Fuel throughput after engine start  
[only fulfilled after approx. 3 min. trip (no idle) after start]  
           
            5 = No fuel enrichment  
(during diagnosis no enrichment can occur   display group 019)          
               6 = Closed throttle position switch open (  display group 008)       
                  7 = Oxygen sensor control, bank 2 active (  display group 008)    
                     8 = Oxygen sensor control, bank 1 active (  display group 007)  
Pa
ge 331 of 366 On Board Dia
gnostic 
(OBD
) - Multi
port Fuel In
jection 
(MFI
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.01.1 
Page 340 of 366
01-244
 Display group 099  Display 
shows  Display/specified 
value  Designation/diagnosis  
Basic 
setting 99  
1 2 3 4  ... RPM   1 = Momentary engine speed   Display group 003, display field 1     ...%   2 = Momentary engine load   display group 003, display field 2    
... C  
3 = Coolant temperature   display group 001, display field 1  
  
-Control OFF  
and/or  
-Control ON  
4 = Oxygen sensor control OFF in "Basic Setting" function 04; Oxygen sensor control 
ON in "Read Measuring Value Block" function 08  
Notes on display field 4:  
 
For defined troubleshooting, the oxygen sensor control is switched off when display group 099 is selected under "Basic 
Setting" function 04, and switched on when display group 099 is selected under "Read Measuring Value Block"function 
08. When leaving "Basic Setting" function 04, oxygen sensor control is automatically active again. 
 You can switch back and forth between "Basic Setting" function 04 and "Read Measuring Value Block" function 08 by 
pressing buttons -4- and -8- on the VAG 1551 scan tool. 
Pa
ge 340 of 366 On Board Dia
gnostic 
(OBD
) - Multi
port Fuel In
jection 
(MFI
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.01.1