center console AUDI A4 1997 B5 / 1.G Airbag Service Workshop Manual
Page 43 of 75
69-74
Airbag control module -J234-, removing
and installing
- Disconnect battery Ground (GND) strap.
- Remove front center console page 68
-30
.
Note:
If the airbag control module is replaced, the new control module must be
coded. - Disconnect securing bracket at harness connector -3-.
- Disconnect harness connector -3- from control module -1-.
- Remove nuts -2- (3x).
Tightening torque: 6 Nm (53 in. lb)
- Remove airbag control module -J234-.
Pa
ge 43 of 75 Airba
gs, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.3