lock AUDI A4 1997 B5 / 1.G AWM Engine Additional Signals Checking Workshop Manual
Page 5 of 25
24-166
Display on VAS5051:
- Select diagnostic function "08 - Read Measuring Value Block" in
selection -1-.
Display on VAS5051:
1 - Enter display group Max. input value = 255
- Select function "005" in button field -2- for "display group number 005"
and press Q button to confirm input.
Pa
ge 5 of 25 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.24.5
Page 9 of 25
24-170
Test requirements:
A/C system OK
No DTCs in DTC memory of Engine Control
Module (ECM).
Vehicle at room temperature (warmer than
+15 C).
Test sequence
- Connect VAS5051 tester Page 01
-7 and
select vehicle system "01 - Engine electronics".
Engine must run at idle for this.
Display on VAS5051:
- Select diagnostic function "08 - Read Measuring Value Block" in
selection -1-.
Pa
ge 9 of 25 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.24.5
Page 18 of 25
24-179
Display on VAS5051:
- Select diagnostic function "08 - Read Measuring Value Block" in
selection -1-.
Display on VAS5051:
Note:
Measuring value blocks 125 and 126 indicate the participants in the
powertrain data-BUS. 1 - Enter display group Max. input value = 255
- Select function "125" in button field -2- for "display group number 125"
and press Q button to confirm input.
Pa
ge 18 of 25 Additional si
gnals, checkin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.24.5