AUDI A4 1997 B5 / 1.G AWM Engine Code Control Module Workshop Manual

Page 1 of 3

01-71


Code Control Module
(function 07)
If control module does not indicate coding
corresponding to vehicle, or if control module has
been replaced, code it as follows.

Procedure

- Connect VAS5051 tester Page 01
-7 and
select vehicle system "01 - Engine electronics".
Ignition must remain switched on for this.

Display on VAS5051:
- Select diagnostic function "07 - Code control module" in selection -1-.

Display on VAS5051:
1 - Enter code Max. input value = 32767
- Enter control module coding in button field -2- according to coding table
Page 01
-73
.
Pa
ge 1 of 3 Code Control Module
(function 07
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.5

Page 2 of 3

01-72

Clarification of coding

XX Country/Exhaust
X Drive/Additional Functions

X Transmission

X Vehicle model

Coding example
16501
USA ULEV
1) (emissions regulations),
Front Wheel Drive (FWD) with ESP
2)
, 5
speed automatic transmission, Audi A4

1) ULEV: Abbreviation for Ultra Low Emission
Vehicle
2) ASR/ESP: Abbreviation for Anti-Slip
Regulation/Electronic Stability Program

- Press -Q- button to confirm input.

Display on VAS5051:
1 - Coding will be performed
- Wait until the next indication appears on display.
Pa
ge 2 of 3 Code Control Module
(function 07
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.5

Page 3 of 3

01-73
Coding table

Country/Exhaust 16 USA ULEV (emissions regulation)
Drive/Additional Functions 0 Front wheel drive with ABS

2 All wheel drive with ABS

5 Front Wheel Drive (FWD) with ASR/ESP:

7 All Wheel Drive (AWD) with Electronic Stability Program (ESP)
Transmission 0 5 speed manual transmission

5 Automatic transmission 01V
Vehicle model 1 Audi A4
Pa
ge 3 of 3 Code Control Module
(function 07
)
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU07.01.5