width AUDI A4 1997 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual

13-60


Note:
The bead of sealant must not be thicker than 3 mm, otherwise excess
sealant will enter the oil pan and obstruct the strainer in the oil intake line.
Note:
Use guide sleeve T10053/1 to attach the sealing flange with sealing ring
installed.
Note:
After assembly, the sealant must dry for approx. 30 min. Only then may
the engine be filled with oil. - Apply bead of silicone sealant -arrow-onto clean sealing surface of
sealing flange, as illustrated (arrow).
Sealant bead width -arrows-: 2 to 3 mm
- Install sealing flange immediately, and tighten all bolts lightly.
- Tighten sealing flange bolts in diagonal sequence.
- Install oil pan Page 17
-23
.
Pa
ge 14 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2