service AUDI A4 1997 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual
Page 1 of 58
15-37
 
     
Valve gear, servicing 
     
Note:  
     
Cylinder heads that have cracks between the 
valve seats or between valve seat inserts and 
the spark plug thread can be used further 
without reducing service life, provided the 
cracks do not exceed a maximum of 0.3 mm in 
width, or when no more than the first 4 turns of 
the spark plug threads are cracked. 
     Wait about 30 minutes after installing the 
camshafts before starting the engine. Hydraulic 
valve compensation elements have to settle 
(otherwise valves will strike pistons). 
     After working on the valve gear, turn the engine 
carefully at least 2 rotations to ensure that none 
of the valves make contact when the starter is 
operated. 
     Replace all gaskets and seals. 
Pa
ge 1 of 58 Valve 
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2 
Page 15 of 58
15-51
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove upper toothed belt guard   Page 13
-35
 .
Pa
ge 15 of 58 Valve 
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2 
Page 22 of 58
15-58
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove upper toothed belt guard   Page 13
-35
 .
    
-  Disconnect connector from camshaft position sensor -arrow-.
-  Remove sensor housing. 
-  Remove sensor rotor and washer.
Pa
ge 22 of 58 Valve 
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2 
Page 28 of 58
15-63
      
Removing  
     
Cylinder head installed 
     Lock carrier must be in service position   
Page 13
-1 . 
    
-  Remove engine cover -arrows-.
-  Remove combination valve for secondary air inlet   Page 26
-64
 .
    
-  Disconnect connector -arrow- from camshaft adjuster.
-  Remove upper toothed belt guard   Page 13
-35
 .
Pa
ge 28 of 58 Valve 
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2