wiring diagram AUDI A4 1997 B5 / 1.G Central Locking System Workshop Manual
Page 3 of 11
57-41
      
Repairing central locking system  
      For additional information   Electrical Wiring 
Diagrams, Troubleshooting & Component 
Locations binder.       
Notes:  
     
After the car has been parked for a lengthy time 
and/or after replacing the central locking system 
pump, the central locking system will not 
function properly until prompted repeatedly. 
     When the system is operating correctly, all 
locks will close within 2 seconds. 
     If the pump operates for longer than 5 seconds, 
there is a leak in the system. 
     When there is a leak in the system, the pump 
must not run for more than 30 seconds. The 
pump's control unit must shut it off at this point. 
     All the lock actuators are equipped with special 
vacuum line connectors that must lock when 
plugged in. 
Pa
ge 3 of 11 Central lockin
g system
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD01.57.8