battery AUDI A4 1997 B5 / 1.G Cruise Control On Board Diagnostic Workshop Manual
Page 11 of 13
01-211
- Switch ignition off.
- Remove control module protective housing
cover.
- Using screwdriver, carefully pry off retainer (arrow).
- Release and disconnect harness connectors from control module.
- Connect VAG1598/31 breakout box to harness connector. Connect
breakout box Ground clip (not visible in illustration) to battery negative
terminal. Check respective test descriptions to see if it is necessary to
connect engine control module to breakout box.
- Perform tests as described in respective repair instructions.
Pa
ge 11 of 13 Cruise control On Board Dia
gnostic
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.01.3