clock AUDI A4 1997 B5 / 1.G Mechanical Throttle Control Servising
Page 9 of 18
20-194
Vehicles with automatic transmission
All vehicles
Note:
Vehicles with manual transmission: retaining clip is located behind the
front wall of the plenum. - Disconnect harness connector -2- from kick-down switch -1-.
- Remove retaining clip -1- on accelerator pedal cable bracket or kick-
down switch, whichever is installed.
-
Twist cable positioning tab approx. 90 in counter-clockwise direction -
arrow 1- and pull positioner out through the fire wall and into into the
plenum -arrow 2-. - Remove accelerator pedal cable.
Pa
ge 9 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6
Page 12 of 18
20-197
All vehicles
-
Twist the cable positioner tab 90 in clock-wise direction -arrow 1 - and
push into same shaped opening in fire wall and let positioner come to
rest with the tab in a vertical position -arrow 2-. - Adjust accelerator pedal cable Page 20
-187
.
Pa
ge 12 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6
Page 15 of 18
20-200
Vehicles with automatic transmission
All vehicles
Note:
For vehicles with a manual transmission (no kick-down switch), the clip is
located on the cable bracket behind the front plenum. - Disconnect harness connector -2- from kick-down switch.
- Remove retaining clip -1- from the kick-down switch.
-
Twist cable positioner approx. 90 in counter-clockwise direction -
arrow 1- and pull out through the firewall side of plenum in direction of -
arrow 2- toward the engine. - Remove the accelerator pedal cable.
Pa
ge 15 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6
Page 18 of 18
20-203
All vehicles
- Slide cable end through back wall of plenum -arrow 1-, secure by
twisting cable positioner tab 90 in clockwise direction -arrow 2- until
triangular shaped piece on cable passes through the same shaped
opening in the back wall of the plenum.
Ensure that when cable comes to rest position, the positioner tab has
returned to a vertical position; thus capturing and correctly positioning
the cable assembly in the firewall opening.
- Adjust the accelerator pedal cable Page 20
-190
.
Pa
ge 18 of 18 Mechanical throttle control, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE04.20.6