AUDI A4 1997 B5 / 1.G Multi Functions Steering Wheel OBD Workshop Manual
Page 1 of 25
01-84
 
     
Multi-function steering wheel, 
On Board Diagnostic (OBD) 
     
General notes
 
     
Technical features of the multi-function 
steering wheel  
      The multi-function steering wheel enables the 
radio to be operated from the steering wheel (the 
most important functions) and contains an 
extensive On Board Diagnostic (OBD).  
      The control module for the multi-function steering 
wheel is equipped with a DTC memory. When 
malfunctions occur in monitored components or 
wiring, Diagnostic Trouble Codes (DTCs) are 
stored in DTC memory with a description of the 
malfunction type.  
Pa
ge 1 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 2 of 25
01-85
      
On Board Diagnostic (OBD), initiating 
program
 
     
Additional information  
     
Electrical Wiring Diagrams, Troubleshooting & 
Component Locations binder 
     Technical service handbook.
     Parts catalog 
Pa
ge 2 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 3 of 25
01-86
      
Safety precautions
 
     
If special testing equipment is required 
during test drive, note the following: 
     
WARNING! 
     
To reduce the risk of accidents observe the 
following: 
     During a road test in an airbag-equipped 
vehicle, the VAS5051 tester or the VAG1551 
scan tool must always be fastened to and 
operated from the rear seat by a second 
technician. 
Pa
ge 3 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 4 of 25
01-87
      
To reduce the risk of injury to people and or 
damage to the electrical system and 
components, observe the following: 
     
Always switch ignition off before connecting or 
disconnecting test/measurement tools. 
     It is possible that the control module will 
recognize a malfunction and store a DTC during 
some tests. Therefore, after completing all tests 
and repairs, check and if necessary erase the 
DTC memory. 
     Always switch ignition off before disconnecting 
or connecting the battery. Failure to do so may 
damage a control module. 
Pa
ge 4 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 5 of 25
01-88
      
Test requirements 
     
Check fuse for function according to wiring 
diagram. 
     Connect VAS5051 tester or VAG1551 scan tool 
 page 01
-108
 . 
     
Switch ignition on.
     
Notes:  
     If nothing is indicated on display, check voltage 
supply for VAG 1551 scan tool according to 
wiring diagram. 
     Additional instructions can be called up via the 
HELP button on the scan tool. 
     The   button is used for advancing through the 
program sequence. 
     
An incorrect entry can be canceled using the C 
button. 
     Function 00 "Automatic test sequence" can be 
performed in operating mode 1 "Rapid data 
transfer". This automatically checks all control 
Pa
ge 5 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 6 of 25
modules installed in the vehicle. 
Pa
ge 6 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 7 of 25
01-89
      
-  Switch ignition on.
     
-  Switch printer on via the PRINT button (indicator 
lamp in button lights up). 
     
-  Press button -1- to select "Rapid data transfer" 
operating mode 1. Rapid data transfer 
HELP
Insert address word XX
    
Indicated on display  
Address word for steering wheel electronics: 16 
-  Press buttons -1- and -6-.
Rapid data transfer  
Q
16 - Steering wheel electronics
    
Indicated on display  
-  Press -Q- button to confirm input.
Pa
ge 7 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 8 of 25
01-90
 
4B0907487E Steerin
g whl. electronics D00
    
Indicated on display after approx. 5 seconds:  
4B0907487 E: Part number of steering wheel electronics - radio 
operation (see also parts catalog) Steering wheel electronics: component markingD00: Software version of control module
- 
Press  button.
Rapid data transfer 
HELP
Control module does not answer
    
If one of these messages is displayed, carry out trouble shooting 
procedures according to the wiring diagram.  
 Electrical Wiring Diagrams, Troubleshooting & Component Locations   
Rapid data transfer 
HELP
Error in communication link
     
Rapid data transfer 
HELP
K wire not switching to Ground
     
Rapid data transfer 
HELP
K wire not switching to B+
     
Pa
ge 8 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 9 of 25
01-91
 
Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
On Board Diagnostic (OBD) functions  
The following functions are possible:  
01 - Check Control Module Versions   page 01
-92
 .  
02 - Check DTC Memory   page 01
-93
 .  
03 - Output Diagnostic Test Mode   page 01
-97
 .  
05 - Erase DTC Memory   page 01
-100
 .  
06 - End Output   page 01
-102
 .  
08 - Read Measuring Value Block   page 01
-103
 .   -  Pressing the HELP button will print out an overview of all of the 
possible functions. 
- 
Press the   button to continue program sequence.
Pa
ge 9 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3 
Page 10 of 25
01-92
      
Check Control Module Versions (scan 
tool function 01)
 
Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -0- and 1-. This selects "Check control module" function 
01. 
Rapid data transfer  
Q
01 - Check Control Module Versions
    
Indicated on display  
-  Confirm input using the -Q- button.
4B0907487E steering whl. electronics D00
    
Indicated on display after approx. 5 seconds:  
4B0907487 E: Part number of steering wheel electronics - radio 
operation (see also parts catalog) Steering wheel electronics: component markingD00: Software version of control module
- 
Press  button.
Pa
ge 10 of 25 Multi-function steerin
g wheel, On Board Dia
gnostic 
(OBD
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE02.01.3