tow AUDI A4 1997 B5 / 1.G Starter Workshop Manual
Page 4 of 8
27-43
- Disconnect wire from terminal 30/B+ by removing nut -2-.
Tightening torque: 16 Nm (12 ft lb)
- Disconnect harness connector -1- from terminal 50.
- Remove bolt -3-.
Tightening torque: 22 Nm (16 ft lb)
- Unbolt wiring clamp -4-.
Tightening torque: 4 Nm (35 in. lb)
- Remove starter mounting bolts -1- and -2-.
Tightening torque: 65 Nm (48 ft lb)
- Remove starter toward front.
Pa
ge 4 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3
Page 7 of 8
27-46
Vehicles with manual transmission
- Remove rear noise insulation panel (arrows).
- Remove mounting bolts -1- and -2- for starter.
Tightening torque: 65 Nm (48 ft lb)
- Remove starter toward front.
Pa
ge 7 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3
Page 8 of 8
27-47
Vehicles with automatic transmission
- Remove right-front wheel.
Installing - Upper bolt -1- can be unscrewed from right-front wheel housing.
Tightening torque: 65 Nm (48 ft lb)
- From engine side, remove lower bolt.
Tightening torque: 65 Nm (48 ft lb)
- Remove starter toward front.
- Install starter in reverse order of removal.
Pa
ge 8 of 8 Starter, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.27.3