key AUDI A4 1997 B5 / 1.G Suspension Steering Column Remove And Install Workshop Manual
Page 5 of 14
48-87
- Remove tie wraps and disconnect harness connectors on steering
column.
Lock cable must be disengaged on vehicles with automatic
transmission
- Move selector lever to "P" position.
- Turn ignition key to position -B- (ignition ON).
- Lift locking clip -1- slightly and disconnect lock cable -2- from steering
lock housing.
Pa
ge 5 of 14 Manuall
y ad
justable steerin
g column, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.12
Page 9 of 14
48-91
On vehicles with automatic transmission,
lock cable must be engaged
- To engage lock cable, first turn ignition key to position -B- (ignition ON).
- Move selector lever to park position.
- Install lock cable -2- in steering lock housing. Make sure locking clip -1-
engages.
Pa
ge 9 of 14 Manuall
y ad
justable steerin
g column, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.12
Page 10 of 14
48-92
Functional check for lock cable
Basic adjustment and routing of lock cable:
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 37
- Turn ignition key to position -B- (ignition ON).
It must be possible to move selector lever from park position
without any resistance
It must only be possible to remove ignition key when selector lever
is in park position and ignition key is in OFF position -A-
- Move selector lever to park position.
Ignition lock must operate freely
With ignition key in position -A- (ignition OFF) it should not be
possible to move selector lever from park position. Ignition key can
be removed
Pa
ge 10 of 14 Manuall
y ad
justable steerin
g column, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.12