lock AUDI A4 1998 B5 / 1.G 01A Transmission General Repair Instructions Workshop Manual
Page 6 of 14
00-17
Nuts, bolts
Always replace self-locking nuts and bolts.
Loosen nuts or bolts, opposite to tightening
sequence.
Tighten and loosen bolts and nuts for securing
covers and housings in a diagonal sequence.
Especially delicate parts, such as clutch
pressure plates, must not be canted. Loosen
and tighten bolts and nuts in stages in a
diagonal sequence.
The tightening torques stated apply to non-oiled
nuts and bolts.
The threads of bolts which are secured by a
locking compound should be cleaned using a
wire brush. Then apply AMV 185 101 A1 when
installing.
CAUTION!
Part numbers are listed here for reference
only. Always check with your Parts
department for the latest information.
Pa
ge 6 of 14 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.00.5
Page 7 of 14
Threaded holes for self-locking bolts or bolts
coated with locking fluid must be cleaned
with tap. Otherwise there is a danger of bolts
shearing when subsequently being removed.
Pa
ge 7 of 14 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.00.5