differential AUDI A4 1998 B5 / 1.G 01V Transmission Drive Pinion And Ring Gear Adjust User Guide
Page 38 of 38
39-196
Checking measurement
Notes:
Drive pinion installed with shim S3 Differential installed with shims "S1" and "S2"
- Turn differential 5 rotations in each direction to seat the tapered roller
bearing.
- Measure backlash 4 times on circumference.
Specification: 0.12 to 0.22 mm
If backlash is outside tolerance, repeat adjustments. Do not change
total shim thickness "Stotal" while doing so. The individual measurement values can deviate a maximum of 0.06
mm from each other
Pa
ge 38 of 38 Drive
pinion and rin
g gear, ad
justin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.39.15