ECU AUDI A4 1998 B5 / 1.G 01V Transmission Service Notes Workshop Manual

00-27


Servicing, notes
The maximum possible care, cleanliness and
proper tools are essential to ensure satisfactory
and successful transmission repairs. The usual
basic safety precautions also apply when
carrying out vehicle repairs.
A number of generally applicable instructions for
individual repair procedures, which are otherwise
mentioned at various points in the Repair
Manual, are summarized here. They apply to this
Repair Manual. They apply to this Repair
Manual.

Special tools and equipment
For a complete list of special tools used in this
repair manual: see "Special tools and equipment"
or "Special tools".

Transmission

Rules of cleanliness for working on automatic
transmissions page 37
-148
.

Do not run engine with the oil pan removed or
without ATF filling and do not tow vehicle.
Secure torque converter on removed
transmission to keep it from falling out.
Pa
ge 1 of 10 Servicin
g, notes
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.00.5

00-30

Nuts, bolts

Loosen bolts in reverse order of tightening
sequence.
Tighten and loosen bolts or nuts for securing
covers and housings without tightening
sequence in diagonal sequence in stages.
Do not cant, and loosen and tighten especially
sensitive parts - e.g. valve body - in diagonal
manner in stages.
The tightening torques stated apply to non-oiled
nuts and bolts.
Always replace self-locking nuts and bolts.
Using a wire brush, clean threads of bolts which
are secured with locking compound. Next,
insert bolts using AMV 185 101 A1.
Threaded holes into which self-locking bolts or
bolts with locking compound are threaded in,
must be cleaned (e.g. using threaded tap).
Otherwise there is danger that the bolts may
shear when removed again.

Circlips
Pa
ge 6 of 10 Servicin
g, notes
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT01.00.5