engine AUDI A4 1998 B5 / 1.G 01W Transmission General Repair Instructions Workshop Manual
Page 2 of 10
Thoroughly clean all connections and the
surrounding area before disconnecting.
When installing transmission, make sure
centering sleeves for aligning engine and
transmission are correctly seated.
Pa
ge 2 of 10 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.00.4
Page 10 of 10
00-15
Clutch mechanism
When removing transmission, remove clutch
slave cylinder without disconnecting lines.
Do not depress the clutch pedal after removing
the slave cylinder if the hydraulic line is still
connected. Otherwise the piston will be pressed
out of the slave cylinder.
Do not cant clutch pressure plate; loosen and
tighten in a diagonal sequence and in stages.
If the clutch has burnt out, thoroughly clean the
bellhousing, flywheel and parts of the engine
facing the transmission in order to reduce the
smell of burnt linings.
Pa
ge 10 of 10 General re
pair instructions
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.00.4