automatic transmission AUDI A4 1998 B5 / 1.G AFC Engine Fuel Supply System Components Workshop Manual
Page 21 of 24
20-14
Installation position of stop buffer
Identification:
HS - Manual transmission
AG -Automatic transmission
Marking -HS- or -AG- must be readable
Attachment of cable sleeve
- Push throttle cable through engine compartment bulkhead.
- Push cable attachment into bulkhead and turn counterclockwise
approx. 90 .
Pa
ge 21 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1
Page 23 of 24
- Pull cable sleeve away from cam at throttle body
until throttle valve has opened fully, then hold
tight in this position.
Vehicles with automatic transmission
- Pull cable sleeve back toward wide open throttle
position until throttle valve is fully open and
kickdown switch is actuated (clicks), then hold
tight in this position.
Pa
ge 23 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1