lock AUDI A4 1998 B5 / 1.G AFC Engine Fuel Supply System Components Workshop Manual
Page 21 of 24
20-14
Installation position of stop buffer
Identification:
HS - Manual transmission
AG -Automatic transmission
Marking -HS- or -AG- must be readable
Attachment of cable sleeve
- Push throttle cable through engine compartment bulkhead.
- Push cable attachment into bulkhead and turn counterclockwise
approx. 90 .
Pa
ge 21 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1
Page 22 of 24
20-15
Accelerator pedal cable, adjusting
CAUTION!
The accelerator pedal cable is easily
damaged (kinked) and therefore must be
handled carefully.
A single slight kink can lead to cable failure
while the vehicle is being driven.
A KINKED CABLE MUST NOT BE
INSTALLED.
When installing the cable, make sure that it is
aligned between its supporting mounts and
the attachment points.
- Pull off cable locking plate at throttle body.
- Depress accelerator pedal to wide open throttle
position.
Note:
A second person is required for this step.
Vehicles with manual transmission
Pa
ge 22 of 24 Fuel su
pp
ly system com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE01.20.1