cooling AUDI A4 1998 B5 / 1.G APB Engine Lubrication System Components Workshop Manual
Page 4 of 74
17-4
13 -
Banjo bolt
Tightening torque: 15 Nm
14 -
Oil distribution line For oil spray jets for piston cooling
15 -
Cylinder block
16 -
Bolt, tightening torque 10 Nm Apply locking fluid D6 when installing
17 -
Oil spray jet For piston cooling
18 -
Gasket Metal gasketAlways replace
Pa
ge 4 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1
Page 24 of 74
17-24
- Unbolt coolant line at front of cylinder head -arrows- and remove.
- Remove water line and auxiliary water pump.
- Remove cover on oil check valves.
Note:
The oil distribution line -2- for the spray jets for piston cooling is also
located in the opening. - Replace oil check valves -1- (25 Nm).
Pa
ge 24 of 74 Lubrication s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE05.17.1