torque AUDI A4 1998 B5 / 1.G AWM Engine Charge Pressure System With Exhaust Turbocharger Workshop Manual
Page 16 of 22
21-58
Note:
Fill the exhaust turbocharger with engine oil via
the oil supply connection.
- Install ribbed belt for A/C compressor Page
13
-20
.
- Top up coolant Page 19
-7 .
- Check oil level Page 17
-35
.
Note:
After installing the turbocharger, run engine for
approx. 1 minute at idling speed; do not rev. up
immediately. This ensures the turbocharger is
properly lubricated.
Tightening torques
Component
Nm
Coolant feed line to exhaust turbocharger
35
Bracket for coolant feed line to exhaust
turbocharger
10
Turbocharger to exhaust manifold
Pa
ge 16 of 22 Char
ge pressure s
ystem with exhaust turbochar
ger, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.3
Page 22 of 22
21-63
- Remove lower air duct hose to charge air
cooler.
- Take out charge air cooler from underneath.
Installing
Installation is carried out in the reverse order of
removal; note the following:
- Install lock carrier Page 13
-1 .
Tightening torque
Component
Nm
Hose clamps for air duct hoses
3.5
Pa
ge 22 of 22 Char
ge pressure s
ystem with exhaust turbochar
ger, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.21.3