air conditioning AUDI A4 1998 B5 / 1.G Climate Control Components In Passenger Compartment Workshop Manual
Page 21 of 34
87-137
Notes for installing:
When installing flap motor, ensure that relay
lever -D- is correctly positioned ( illus. A87
-
0161 on page 87
-136
).
Install strap -A- (on bracket for motor) first into mounting -B- (on
heater/air conditioning assembly). After installing, always check DTC memory page 01
-18
.
Testing -V85- page 01
-42
(output DTM).
Electrical test page 01
-115
.
Wiring harness must be installed so that it does not come in contact
with moving components (e.g. motor linkage). If the crank on the motor is positioned so that the lever can not be
hooked in or the motor can not be installed, connect motor to the
wiring harness, switch on ignition and place lever in appropriate
position by activating the button for air distribution on A/C control head
-E87-.
Pa
ge 21 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21
Page 31 of 34
87-147
Air flow flap motor -V71-, removing and
installing (1997 )
Note:
Motor is installed between heater/air conditioning
assembly and bulkhead and operates the air flow
flap and fresh air/recirculating air flap.
Remove glovebox
Repair Manual, Body Interior, Repair Group
70
- Disconnect electrical connector from motor.
- Remove bolts -A- and -B-.
- Unhook strap -C- of bracket from heater/air conditioner assembly
mounting and remove motor.
Pa
ge 31 of 34 Climate control com
ponents in
passen
ger com
partment, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.HA01.87.21