buttons AUDI A4 1998 B5 / 1.G Engine Oil Level Checking Workshop Manual
Page 62 of 111
62
Door locks, locking buttons, child safety
lock - checking operation
WARNING!
Remove, clean, and grease all door locks
which do not operate freely.
Door locks and locking buttons:
- Open and close driver and front passenger door.
Check whether locking buttons move up and
down, respectively, when this is done.
- Press locking button on front passenger door
and rear doors down, close doors. Doors must
be locked.
It must not be possible to press down locking
button on driver door so long as door is open.
Child safety lock (rear doors):
- Move lever on door lock down in direction of
arrow (see marking on door lock). Door lever on
inside must be blocked and locking button must
be pulled up.
Pa
ge 62 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6
Page 89 of 111
88
Resetting service interval display
Vehicles from model year 1998 The service interval display must be reset as part
of the Pre-Delivery Inspection and also after
every Oil Change Service and Inspection
Service.
Delivery inspection
The service interval display can be reset using
one of two methods:
Using the adjustment buttons for the trip
recorder and clock on the instrument cluster
- Reset "service OIL" and "service INSP" Page 92
or
Using VAG 1551 Scan Tool
- Select adaptation channel 02 and enter
adaptation value "00000" Page 89
Pa
ge 89 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6
Page 94 of 111
92
Resetting service interval display with
adjustment buttons for trip recorder and
clock.
- Switch ignition off.
The trip recorder display -3- will read "service OIL".
Note:
Depending on the make of the instrument cluster, the display on the trip
recorder will either continue to read "service OIL" (Nippon Seiki) or
change to "- - -" (VDO).
The trip recorder display -3- will read "service INSP". - Press trip recorder reset button -2- on instrument cluster and at same
time switch ignition on.
- Release button.
- Pull clock adjuster button -1- on instrument cluster and hold for approx.
2 seconds. This resets "service OIL" display.
- Press trip recorder reset button -2- again to advance to next type of
service.
- Release button.
Pa
ge 94 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6